Home > tunstern-carbide-ball

tunstern carbide ball



Related

"Tunstern Carbide Ball"

Products
Related

"Tunstern Carbide Ball"

Blog
about zys one way bearing
ZYS One Way Bearings are divided into open type and sealed type. The keyway can be machined on the inner ring and outer ring.ZYS freewheel clutch is mainly used in such applications as speed conversion, reversal preventing, intermittent movement and etc. Working principle is to use friction generated by wedge, spring and such compression elements t... ZYS One Way Bearings are divided into open type and sealed type. The keyway can be machined on the inner ring and outer ring.ZYS freewheel clutch is mainly used in such applications as speed conversion, reversal preventing, intermittent movement and etc. Working principle is to use friction generated by wedge, spring and such compression elements to transmit torque.Features: small size, transmitting high torque, smooth combining, high slip combining, working without noise, etc.Technical parameters of ZYS one way clutches:Fitted outer raceway diameter: φ30mm～φ150mmFitted inner raceway diameter: φ10mm～φ120mmMinimum mounting width: 15mm～30mmRated torque: 60N.m～4000N.mZYS freewheel clutches are mainly applied in aero-engine, reducer, starting system and the transmitting system of helicopter. Working speed can reach 30000rpm, and even 45000rpm in special condition.http://www.zysbearing.com/bearings/ View Details
Can you install the deep groove ball bearing?
1. When installing the bearing, it should be evenly stressed and cannot be hammered directly. For example, if the interference is large, the bearing should be placed in an air-heating furnace or oil furnace with automatic temperature control, and the heating temperature should be strictly controlled below 120°. 2. The bearing with nylon cage can ... 1. When installing the bearing, it should be evenly stressed and cannot be hammered directly. For example, if the interference is large, the bearing should be placed in an air-heating furnace or oil furnace with automatic temperature control, and the heating temperature should be strictly controlled below 120°. 2. The bearing with nylon cage can work continuously for a long time under the temperature -40°-120°. It should not exceed 4 hours at 150°, and the short-term temperature should not exceed 180°. 3. The warehouse where the bearings are stored should be clean, dry and not allowed to be stored in the same warehouse with the chemical products. The relative humidity should not exceed 65%, and the bearings are not allowed to be stored on the ground. 4. The stock bearings should be cleaned every year for rust-proof packaging. View Details