Home > BLOG > the clutch pedal force will be transmitted to the clutch release bearings

the clutch pedal force will be transmitted to the clutch release bearings
2014-09-14 by seoer4
When the clutch release bearing work, plastic bearing the clutch pedal force will be transmitted to the clutch release bearings. Clutch bearing clutch pressure plate toward the center, so that the pressure plate is pushed away from the clutch, the clutch plate and flywheel separation. When the clutch pedal is released, roughness measuring instrument the pressure plate before the spring pressure will push the pressure plate, the pressure to the clutch plate, clutch plate and clutch bearing separation, and the completion of a work cycle. Operating temperature is too high lead to overheating. Many drivers in turning or deceleration, often half-pedal clutch, some Guadang rear foot on the clutch pedal also; Some vehicles free travel adjustment is too large, making the clutch is not complete, in a semi-bonding, semi-isolated state, this causing the state of the friction plastic bearing generated between the sliding friction plate and flywheel, a large amount of heat transmitted to the bearings, the bearing is heated to a certain temperature, the melted grease or diluted flow, the temperature of the bearing to further improve the separation, when the temperature reaches a certain degree will burn bad release bearing.